How to Replace a 4-Prong Talon Mount Head

Quick answer

Remove the old 4-prong Talon mount head by pressing the release button, then snap the new ToughTested 4-Prong Talon Mount Head into place until it locks.

Step-by-step replacement guide

1. Remove the old mount head: Locate the release button on the side of your current mount head. Press and hold it while gently pulling the head away from the mount base. It should slide off without excessive force. If it sticks, check that the release button is fully depressed — do not yank or twist.
2. Align the new Talon mount head: Take your ToughTested 4-Prong Talon Mount Head and line up the four prongs with the slots on your mount base. Ensure the orientation matches so the release button faces outward for easy access. Misaligned prongs can prevent a secure lock — double-check the position before pushing.
3. Snap it into place: Push the new mount head firmly onto the base until you hear a click. The Off-Road Lock will engage, adding extra stability. Give it a gentle tug to confirm it is locked. No click means it is not fully seated — remove and try again rather than forcing it.
4. Test the release button: Press the release button to make sure the head detaches smoothly. Then reattach it to verify the lock engages correctly each time. A sticky or hard-to-press button may indicate debris in the mechanism — clean with a dry cloth.

What you need

• ToughTested 4-Prong Talon Mount Head Replacement: 4-prong Talon mount head with snap-in design and Off-Road Lock for added device stability. The Off-Road Lock helps keep your phone or tablet secure even on bumpy roads, reducing the chance of the mount head loosening.