Know what the Boost 400 is rated to start
The ToughTested Boost 400 is a 400-amp jump starter with a 6,000mAh battery. Its 400-amp output is rated for 4- and 6-cylinder gas engines. That rating is your first checkpoint: if your vehicle has a different engine type, the supplied information does not confirm that this unit is suitable, so check your vehicle manual or ask a mechanic before relying on it.
The same unit also works as a USB phone charger when you are not jumping a vehicle. That dual role is useful in a roadside emergency, but it does not change the jump-start rating above.
Boost 400 specs that affect your jump-start plan
- ToughTested Boost 400 Amp 6000mAh Jumpstarter & Portable Phone Charger: 400-amp output — enough current to start 4- and 6-cylinder gas engines This is the compatibility limit stated in the catalog. Match it to your engine before you count on the unit.

ToughTested Boost 400 Amp 6000mAh Jumpstarter & Portable Phone Charger - ToughTested Boost 400 Amp 6000mAh Jumpstarter & Portable Phone Charger: 6,000mAh battery — keeps the bank charged for multiple jump attempts or phone charges A charged internal battery is the baseline for any jump attempt. The same capacity also supports phone charging when the jump is done.
- ToughTested Boost 400 Amp 6000mAh Jumpstarter & Portable Phone Charger: Compact size — packs into a glove box, center console, or roadside emergency kit Storage location matters for a dead-battery situation: you want the unit in the vehicle, not in the garage.
A safe sequence for connecting the Boost 400
The supplied product record does not include clamp-connection instructions or a preparation checklist. The steps below are general safe-jumpstarting practices, not manufacturer instructions for this specific unit. If the Boost 400 packaging or manual gives different steps, follow those.
- 1. Confirm the engine rating: Check that your vehicle has a 4- or 6-cylinder gas engine. The Boost 400 is rated for those engines only according to the supplied catalog facts. Do not assume it will start other engine types.
- 2. Make sure the jump starter is charged: The 6,000mAh internal battery must have charge before it can deliver a jump. Charge it at home or via USB before storing it in the car, and check it periodically.
- 3. Turn off the vehicle and accessories: Switch off the ignition, lights, radio, and any accessories before connecting clamps. This reduces the chance of a spark or electrical surge.
- 4. Connect the clamps in the standard order: Connect the red (positive) clamp to the battery's positive terminal first, then the black (negative) clamp to a solid metal ground on the engine or chassis, not directly to the negative battery terminal. This is general safe practice; the supplied record does not specify a different order.
- 5. Attempt the start: Crank the engine. If it does not start, wait a minute before trying again. The 6,000mAh battery supports multiple jump attempts according to the catalog, but repeated cranking can drain it.
- 6. Disconnect in reverse order: Once the engine runs, remove the black clamp first, then the red clamp. Keep clamps away from moving parts.
Where the Boost 400 record stops short
The supplied product information does not include a clamp-connection diagram, a charging time, a jump-start procedure, or safety warnings beyond the engine rating. It also does not confirm whether the unit has reverse-polarity protection or a built-in light. Treat those as open questions and check the physical product manual before first use.
If you need step-by-step instructions specific to this model, the packaging or the manufacturer's documentation is the right source. The general sequence above is a starting point, not a substitute for the manufacturer's own procedure.
Using the Boost 400 as a phone charger after the jump
The Boost 400 has a USB phone charging function, so it can top up a phone when you are not jumping a vehicle. The supplied record does not specify the USB port type, charging amperage, or cable requirements. Check the port on the unit and use a cable that fits your phone.
After a jump start, the internal battery has done heavy work. If you also need to charge a phone, do that before the jump or after the vehicle is running and you no longer need the jump starter. The catalog does not give a remaining-capacity indicator, so plan to recharge the unit after any jump attempt.
Safety checks before you rely on the Boost 400
- Engine type: Only 4- and 6-cylinder gas engines are confirmed by the supplied catalog facts. Do not use it on other engines without manufacturer confirmation.
- Battery condition: A jump starter is for a dead battery, not a damaged one. If the battery is cracked, leaking, or visibly damaged, do not attempt a jump.
- Clamp placement: Connect positive first, then negative to a metal ground. Avoid touching clamps together or to moving parts.
- Ventilation: Jump-start in a well-ventilated area. Batteries can emit explosive gases.
- Storage: Keep the unit in the glove box, center console, or emergency kit so it is with the vehicle when needed. Avoid extreme temperatures; the supplied record does not give a storage temperature range.


