ToughTested Adhesive Dashboard Mounting Pad: Install Guide

Quick Answer

Install the ToughTested Adhesive Dashboard Mounting Pad on a clean, flat surface to create a smooth base for your suction mount. Follow the steps below to ensure a secure and long-lasting bond.

Installation Steps

1. Choose a Flat Location: Select a flat, smooth area on your dashboard where you want to place the pad. Avoid curves, textured surfaces, or areas near airbags. Check that the spot is truly flat by placing the pad on it without removing the backing.
2. Clean and Dry the Surface: Thoroughly clean the chosen area with a mild cleaner or alcohol wipe to remove dust, grease, and oils. Let it dry completely before proceeding. Don't skip this step—a clean surface is critical for the adhesive to bond properly.
3. Apply the Pad: Peel off the backing from the 3M adhesive and press the pad firmly onto the dashboard. Apply even pressure across the entire pad for about 30 seconds. If you need to reposition, do it immediately before the adhesive sets.
4. Attach Your Suction Mount: Once the pad is securely in place, press your suction mount onto the pad's smooth surface. Follow the mount's instructions for locking it into place. Wait at least 24 hours for the adhesive to fully cure before attaching heavy devices.

Product Details

• ToughTested Adhesive Dashboard Mounting Pad: Peel-and-stick 3M adhesive backing This ensures a strong bond when applied to a clean, flat surface, giving you confidence that your mount stays in place.